Icon Factory Shock Service

Icon Vehicle Dynamics offers a rebuilding service for our entire line of shocks. The basic rebuild service includes labor, new seals and new shock oil and services start at $75.00 per shock. If other parts such as bearings, shafts, and other components need to be replaced an Icon representative will call you and let you know the additional costs of these items. Please see below for a list of services we offer as well as the recommended service intervals. If you feel your shock service may fall under warranty, please DO NOT fill out this form and call ICON Customer Service: 951-689-4266.

  1. Complete the shock service request form below.
  2. You will receive an email with your Service Number.
  3. Remove shocks from the vehicle and clean off any dirt or debris. This is an important step and will save you from additional labor costs. If shipping back coilover shocks you do not need to remove the springs from the shock. Please retain all mounting hardware, brackets and bearing spacers.
  4. Package the shocks to ensure they will not be damaged or lost in shipping. If packed properly the shocks should not move in the box.
  5. Write the assigned Service Number on the outside of the box. (Boxes without service numbers will not be accepted).
  6. Ship the shocks to the following address:
    Icon Vehicle Dynamics – Shock Service
    7929 Lincoln Ave.,
    Riverside, CA 92504

We recommend purchasing insurance for the package and requesting signature required. Feel free to use any carrier that is convenient (UPS, USPS, FedEx)

Upon receipt of your shocks an Icon shock technician will inspect all parts and you will be notified if any additional parts and/or services are needed.

Upon completion of your rebuild a representative will call you with the exact total of the rebuild as well as shipping charges back to you.

Please note, we are unable to ship to PO Boxes or Military Addresses. If you are outside of the United States please call for international return shipping options.

ICON Shock Service Intervals

Street

Every 3-5000 miles

10000 miles

15000 miles

40000 miles

Clean Shock Bodies

Clean Shafts

Recommended Full Service

Inspect Bushings, Bearings and Spacers

Street / Dirt

Every 3-5000 miles

10000 miles

15000 miles

40000 miles

Clean Shock Bodies

Clean Shafts

Recommended Full Service

Inspect Bushings, Bearings and Spacers

●

 
ICON Shock Services by Type

Type of Shock

Basic Rebuild: Includes new oil, seals and standard cleaning. Pricing is per shock.

Revalve: Includes shim replacement & labor. Pricing is per shock

2.0 Aluminum Series Emulsion / IFP

$75.00

$35.00

2.0 Aluminum Series Remote Reservoir

$75.00

$35.00

2.0 Bump Stop

$100.00

$35.00

2.0 Remote Reservoir CO

$150.00

$35.00

2.5 V.S Series Emulsion / IFP

$150.00

$35.00

Centerline Stabilizer

$150.00

$35.00

2.5 Remote Reservoir CO

$150.00

$35.00

2.5 Piggyback

$150.00

$35.00

3.0 Coilover

$200.00

$35.00

3.0 Bypass

$200.00

$35.00

Omega Series Bypass

$200.00

$35.00

 
Additional Part Costs

During the rebuild process, the Service Technician inspects the common wear items of the shock. The cost for these common wear items are listed below.

Component**

Costs Starting at

Labor starting at

Bearings & Spirolocs

$22.00

$10.00

Heim Spacers

$10.00

n/a

Shock Shafts

$30.00

$10.00

Lower Eyelet

$25.00

$10.00

Cylinder

$85.00

$30.00

Hose Assembly

$25.00

$10.00

* *These costs will vary by application

 

Available Shock Upgrades

These upgrades will vary depending on the vehicle. The costs listed below are the starting costs of each upgrade service and priced per shock absorber. For more details please reach out to our Technical Support Staff.

Shock Upgrades (Incl. Basic Rebuild & Labor)

Costs Starting at

2.5 IFP to 2.5 Remote Reservoir

$700 per pair

2.5 PB to 2.5 PB CDCV

$500 per pair

2.5 IFP Coilover to Remote Reservoir (Application Specific)

$600 per pair

2.5 IFP Coilover to Remote Reservoir w/ CDC Valves (Application Specific)

$900 per pair

2.5 Remote Reservoir - Upgrade to CDC Valve (Application Specific)

$400 per pair

2.5 Finned Reservoir Add-on

$300 per pair

 

Shock Service Contact Information

  • Vehicle Info

  • Icon Shock Info



  •  (Please enter the code above)

  • Currently shock servicing is performed on Tuesdays. Please be aware of when we receive your shocks back as it make take up to a week for servicing to be completed. By submitting this form you hereby authorize ICON Vehicle Dynamics, LLC to complete service on your shocks with the necessary materials. You understand that estimates include all parts and labor, however, if upon further inspection additional work or parts are needed, you will be contacted for approval. In the event your shocks require additional components and / or additional labor time due to the condition they were shipped in (i.e. excessive dirt, mud build-up, rust / corrosion), other cost may occur.